Copyright FoldingCamperInformation 2009 - Site maintained by ImpactWebMasters.co.uk
You Are Here -
Contact Us on 01604 785400
Fitting Information Related to Water
Fill water bottle, plug pump into socket and drop in bottle. Connect 12v supply from the car, onboard battery or mains. Drain bottle for winter storage.
Fill hot water tank before heating water. To fill tank, fill water bottle, plug pump into socket and drop in bottle. Close bleed tap next to hot water tank. Connect 12v supply from car, onboard battery or mains. Open hot tap and run till no bubbles / air coming out. Drain hot water, toilet and all taps for winter.
Mains 240v Hot Water Heating
Fill hot water tank. Plug in mains lead, making sure all trips and fuses are on. Switch on hot water rocker switch next to control. No temperature adjustment.
Gas Water Heating
Fill hot water tank. Turn on gas valve, these have a 12v supply for the pump, so make sure switched on. Remove cover from outside vent. turn on hot water switch next to the temperature control. Green light shows it is a light. Red shows it has gone out, leave two minutes before you begin re-lighting. Hot water can be run on gas and electric at the same time.
Fill fresh water tank. Add small amount of water and toilet chemicals to the waste tank. Electric toilet have a 12v supply, so make sure it is connected.